Bosch EXACT 12V-6-670 Original Instructions Manual page 15

carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Do not use application tools that are worn or in other-
u
wise less than perfect condition. Defective application
tools can break, for example, causing material damage
and personal injury.
When fitting an application tool, make sure that it is
u
held securely in the tool holder. If the application tool is
not held securely in the tool holder, it may become loose
and consequently uncontrollable.
Be careful when screwing in long screws – there is a
u
risk of slipping when using particular screws and ap-
plication tools. Long screws are often difficult to control
and there is a danger that you will slip and hurt yourself
when screwing them in.
Check which rotational direction is set before switch-
u
ing on the power tool. If you want to loosen a screw but
the rotational direction is set to tighten the screw, for ex-
ample, the power tool may move violently and uncontrol-
lably.
Do not use the power tool as a drill. Power tools with a
u
shut-off clutch are not suitable for drilling. The clutch can
shut off automatically and without warning.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Technical Data
Industrial cordless screwdriver
EXACT
Article number
Rated voltage
A)B)
No-load speed n
0
A)B)
Maximum Power Boost speed
Max. torque, hard/soft screwdriving applic-
A)
ation according to ISO 5393
Tool holder
– Quick-change chuck
Weight according to
C)
EPTA-Procedure 01:2014
Protection rating
Rechargeable battery (not included in the
scope of delivery)
Recommended ambient temperature dur-
ing charging
Bosch Power Tools
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for tightening and loosening
screws, bolts, nuts and other threaded connectors in the
specified power and dimension ranges.
The power tool is not suitable for use as a drill.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Cover for clutch
(2) Fastening screw for lid
(3) LED indicator for screwdriving applications (red/
green)
(4) LED indicator for battery charge level (yellow/red)
(5) Rotational direction switch
(6) Battery release button
(7) Rechargeable battery
(8) On/off switch
(9) Quick-change chuck
(10) Tool holder
(11) Application tool
(12) Adjustment tool
(13) Setting disc
(14) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
12V-6-670
3 602 D96 4.6
V= 12
–1
min 134–670
–1
min 900
Nm 1.5–6.0
¼"
kg 0.83–1.07
IP 20
Li-ion
°C 0 to +35
English | 15
a)
a)
a)
a)
a)
12V-4-1100 12V-2-670
3 602 D96 4.4 3 602 D96 4.5
12
220–1100 134–670
1500
1.0–4.0 0.5–2.0
¼"
0.83–1.07 0.83–1.07
IP 20
Li-ion
0 to +35 0 to +35
1 609 92A 7DK | (24.11.2022)
12
900
¼"
IP 20
Li-ion