Mackie Sound Palette Series SP2400 Instruction Manual page 9

Note: This application provides independent source selection for each zone, or common input
source selection for both zones (room combining). Both DX8 Selection Remote Controls are used
to select Presets 1 and 2.
For example, Preset 1 might route the CD Player and the Zone A microphone to Zone A, and the
Cassette Player and the Zone B microphone to Zone B, to be used when the divider is in place
between the two zones. Preset 2 might route both microphones and the audio signal from the
laptop to both Zones A and B, to be used when the divider is removed between the two zones.
Both Zones on the SP2400 are assigned the same AMP ADDRESS, so when "OFF" is selected on
the SP2400, the DX8 signal at the Mic/Line Input is routed to the SP2400 outputs. The local input
sources (Tuner and CD 5-Disc Changer) or the Global Background Music via the Expansion I/O can
be routed to the SP2400 outputs by selecting 1, 2, or 4 on the SP2400 front panel.
D: Room Combining—Zones
ON OFF ON OFF
OFF/ON MIC AMBIENT
OFF/ON PRIORITY 4 INPUT
MASTER/SLAVE
UP
DOWN
8 7 6 5 4 3 2 1
ON
8 7 6 5 4 3 2 1
ON
SP2400 – 9