Advertisement
Table of Contents
1
Align the device keyboard under the
bottom caseʼs front clips on both sides.
4
Align the device screen under the top caseʼs side
clips on both sides.
GumdropCases.com
2
Pop on the side clips.
5
Slide the top case down evenly (leveled), to secure
the screen behind the side clips, until the device
reaches the caseʼs top edge.
INSTALLATION
3
Carefully press the rear corner clips to snap onto
the keyboard.
6
Close the case and press on the clips located on
the rear of the top case. Make sure the clips are
securely attached.
Congratulations on your new case!
Advertisement
Table of Contents
Related Manuals for Gumdrop PROTECH 11D000
Summary of Contents for Gumdrop PROTECH 11D000
- Page 1 INSTALLATION Align the device keyboard under the Pop on the side clips. Carefully press the rear corner clips to snap onto bottom caseʼs front clips on both sides. the keyboard. Align the device screen under the top caseʼs side Slide the top case down evenly (leveled), to secure Close the case and press on the clips located on clips on both sides.
- Page 2 REMOVAL CRITICAL! Unhook the rear clips to release the bottom Start sliding the top case off by pushing up with FOLLOW STEPS 1 AND 2 IN ORDER of the top case from the device. your fingers on the bottom corners. Failure to do so may result in damage to the device.
Need help?
Do you have a question about the PROTECH 11D000 and is the answer not in the manual?
Questions and answers