Advertisement
Table of Contents
1
Slide the device keyboard under the
bottom case's left side clip.
4
Carefully massage the rear corner clips
up and over device edge to snap onto
the keyboard.
GumdropCases.com
2
Press the other side of the keyboard down
to snap into the right side clip securely.
5
Hook the top case rear PC clips up onto the
device bottom edge.
INSTALLATION
3
Push the keyboard forward until it is flush
with the front edge of the bottom case.
6
Press all 7 clips over the device, with
pressure from both sides, to snap into
place securely.
Congratulations on your new case!
Advertisement
Table of Contents
Related Manuals for Gumdrop DropTech
Summary of Contents for Gumdrop DropTech
- Page 1 INSTALLATION Slide the device keyboard under the Press the other side of the keyboard down Push the keyboard forward until it is flush bottom case’s left side clip. to snap into the right side clip securely. with the front edge of the bottom case. Carefully massage the rear corner clips Hook the top case rear PC clips up onto the Press all 7 clips over the device, with...
- Page 2 REMOVAL CRITICAL! Unhook the top case rear PC clips from the Push the upper left and right side clips FOLLOW STEPS 1 AND 2 IN ORDER device bottom edge. outward to release the sides of the case from the device. Failure to do so may result in damage to the device.
Need help?
Do you have a question about the DropTech and is the answer not in the manual?
Questions and answers