Advertisement
Table of Contents
1
Align the device keyboard under the
bottom case's side clips on both sides.
4
Hinge the top case's top interior onto the device
screen. Rotate the case towards the back.
GumdropCases.com
2
Push the keyboard forward until it is flush
with the front edge of the bottom case.
5
Press the upper side clips over the device, with
pressure from both sides, to snap into place
securely.
INSTALLATION
3
Carefully press the rear corner clips to snap
onto the keyboard.
6
Repeat step 5 with the lower side clips.
Congratulations on your new case!
Advertisement
Table of Contents
Related Manuals for Gumdrop SlimTech Dell Latitude 13 5300
Summary of Contents for Gumdrop SlimTech Dell Latitude 13 5300
- Page 1 INSTALLATION Align the device keyboard under the Push the keyboard forward until it is flush Carefully press the rear corner clips to snap bottom case’s side clips on both sides. with the front edge of the bottom case. onto the keyboard. Hinge the top case’s top interior onto the device Press the upper side clips over the device, with Repeat step 5 with the lower side clips.
- Page 2 REMOVAL CRITICAL! Push the lower left and right side clips Push the upper left and right side clips FOLLOW STEPS 1 AND 2 IN ORDER outward to release the bottom of the top outward to remove the top case from the case from the device.
Need help?
Do you have a question about the SlimTech Dell Latitude 13 5300 and is the answer not in the manual?
Questions and answers