Advertisement
Table of Contents
1
Align the device keyboard under the
bottom case's side clips on both sides.
4
Align the device screen under the top
case's side clips on both sides.
GumdropCases.com
2
Push the keyboard forward until it is flush
with the front edge of the bottom case.
5
Slide the top case down, to secure the screen
behind the side clips, until the device reaches
the case's top edge.
INSTALLATION
3
Carefully press the rear corner clips to
snap onto the keyboard.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
Congratulations on your new case!
Advertisement
Table of Contents
Related Manuals for Gumdrop DropTech 01H011
Summary of Contents for Gumdrop DropTech 01H011
- Page 1 INSTALLATION Align the device keyboard under the Push the keyboard forward until it is flush Carefully press the rear corner clips to bottom case’s side clips on both sides. with the front edge of the bottom case. snap onto the keyboard. Align the device screen under the top Slide the top case down, to secure the screen Press the lower side clips over the device,...
- Page 2 REMOVAL CRITICAL! Push the lower le and right side clips Start sliding the top case o by pushing up FOLLOW STEPS 1 AND 2 IN ORDER outward to release the bottom of the top with your fingers on the bottom corners. case from the device.
Need help?
Do you have a question about the DropTech 01H011 and is the answer not in the manual?
Questions and answers