Changing Basic Settings; Home Connect - Bosch SMS6HCB02A Information For Use

aus Basic settings
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows
36
Display text Selection
Cn:00 Cn:00 - Cn:01
rc:01 rc:00 - rc:02
rE: Start with
Y:ES
Confirm with
⁠ .
Description
Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→ "Home Connect ",
Page 37
Activate or deactivate
→ "Remote Start
Page 38.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the
→ "Activating Remote
Start
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 37
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Press
3.
the display shows the required set-
ting.
Press repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
",
button.
", Page 38
repeatedly until