Related Manuals for Orava OH-11A
Summary of Contents for Orava OH-11A
- Page 1 11-rib electric oil radiator with hot air fan OH-11A Instruction manual OH-11A...
-
Page 2: Intended Use Of The Device
ORAVA electrical appliances are manufactured according to the state of the art and recognized safety rules. Nevertheless, improper and unprofessional use or use contrary to the intended use may result in injury or danger to the life of the user or third party. - Page 3 • Before operating the unit, we recommend that you carefully read the instruction manual and operate the equipment in accordance with the instructions! • The safety instructions and warnings in this manual do not cover all the possible conditions and situations that may arise when using the device.
- Page 4 1. Ambient temperature: +5 ÷ +40 ° C 2. Humidity: 5 ÷ 85% 3. Altitude: ≤ 2 000 m 4. Occurrence of water: intermittent condensation of water or occurrence of water vapor 5. Occurrence of foreign bodies: quantity and type of dust are insignificant 6.
- Page 5 shock due to the use of electrical appliances by laypersons, it is recommended to install the power supply circuit for sockets with a rated current not exceeding 20 A RCD with a rated operating current not exceeding 30 mA. To ensure the safety and correctness of the electrical installation, consult a qualified electrician.
- Page 6 disruption of the insulating state and consequently fire. • Do not expose the appliance to water or moisture. The ingress of water into the appliance increases the risk of electric shock. If the power cord is wet or the water has penetrated the water, disconnect it immediately from the mains.
- Page 7 The hands can be cleaned using detergent detergents specially designed to clean household appliances. • If you do not use the appliance, clean it or disconnect the appliance from the power supply when the appliance is faulty. • Electrical appliances that are cleaned after use and are not intended to be completely or partly immersed in water or other liquid, protect against the effects of dripping and / or splashing water and before immersion.
- Page 8 2.Special safety instructions. Read carefully! • The electrical equipment is designed and manufactured in such a way as to enable safe operation and use by persons without professional qualifications. Despite all the precautions that have been taken by the manufacturer for safe use, operation and use carry some residual risks and associated hazards.
- Page 9 Unpacking/Packaging • Unpack and dispose of all parts and accessories of packaging materials and labels before operating the machine. Store all packaging materials in a safe place or keep them out of reach of children and vulnerable persons. There is a risk of serious injury! There is a danger of suffocation! Inspection/Commissioning Caution!
- Page 10 Warning!Read carefully. • An electrothermal appliance or an electric heater designed for heating can be installed on the floor of the A1fl or A2fl reaction class material. These technical building materials are classified as non-combustible according to a single European classification system (where index fl means “floor - floor”).
- Page 11 • Do not place or install an electrical appliance or electric heater on a bathroom, washroom or shower unless the safety requirements for electrical equipment and electrical installations in these areas are met. • If the bathroom in the living space is sufficiently spacious and meets the requirements for division into zones, the location and use of electrical equipment is only possible with regard to the safety requirements set for these areas.
- Page 12 Operation /Supervision Caution! • The appliance may only be operated if it is in good technical condition and under the conditions laid down in the generally binding regulations on technical conditions and requirements of fire safety during installation and these operating and use instructions. •...
- Page 13 Caution! • Use extreme caution when operating the appliance. • At the time of operation, some surfaces of the equipment become very hot. If heater is running at max. performance, the device can be hot. Do not touch the heated surfaces of the device. Use only handles and grips to handle the device.
- Page 14 • Do not use the appliance near bathtubs, showers, washbasins or other containers containing water, including swimming pool. Do not remove the device if it falls into the water. First, unplug the power cord from the wall outlet and then remove it from the water. In such cases, take the equipment to a specialist garage to check that it is safe and functioning properly.
- Page 15 • When not in use, unplug the power cord from the wall outlet. Store the device with the power cord attached to the fixed parts of its covers. There is a risk of serious injury! • Never overload the equipment beyond the limits specified in the technical data! •...
- Page 16 Technical specifications Power supply: 230 V~ 50 Hz Oil radiator power: 1 000 W/1 500 W/2 500 W Hot air fan input: 400 W Dimensions (W x H x D): 51 x 63 x 23 cm Weight: 11,3 kg Noise level: 50 db (A) The declared noise emission value of this appliance is 50 dB (A), which is the A-sound power level with respect to the reference...
- Page 17 Parts description A Plastic handle B Rotary thermostat C Power adjustment switch I D Power adjustment switch II E Ribs F Hot air fan switch G Mains lead H Wheels I Slat J Exhaust vent of hot air fan...
-
Page 18: Operation
3 In this position, the thermostat will regulate the operation of the device. If the room temperature drops, the device will turn on if the temperature is too high, the device will shut down Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. -
Page 19: After Operation
Hot air fan A hot-air fan can be used to immediately heat the ambient air. To switch the hot air fan on and off, press switch F. After operation 1 After operation, set the thermostat knob to the minimum position, turn the power switch to 0, turn off the hot air fan switch to 0, and unplug the appliance.