Orava HO-82 Instruction Manual

Orava HO-82 Instruction Manual

Halogen heater

Advertisement

Quick Links

Halogen heater
HO-82
EN
Instruction manual
HO-82

Advertisement

Table of Contents
loading

Summary of Contents for Orava HO-82

  • Page 1 Halogen heater HO-82 Instruction manual HO-82...
  • Page 2: Intended Use Of The Device

    ORAVA electrical appliances are manufactured in accordance with the state of the art and recognized safety regulations. Nevertheless, incorrect and unprofessional use or use contrary to the intended purpose may create a risk of injury or endanger the life of the user or a third party, resp.
  • Page 3 1.1 General safety instructions • Before putting the device into operation, we recommend that you carefully read the operating instructions and operate the device in accordance with the specified instructions! • The safety instructions and warnings in this manual do not cover all possible conditions and situations that may occur when using the device.
  • Page 4 • The operating environment of the device must always comply with the specified basic characteristics. Operating environment characteristics: 1. Ambient temperature: +5 ÷ +40 ° C 2. Humidity: 5 ÷ 85% 3. Altitude: ≤ 2,000 m 4. Occurrence of water: occasional condensation of water or occurrence of water vapor 5.
  • Page 5 • To ensure increased safety against the risk of electric shock when using electrical appliances by laymen, it is recommended to install a residual current device (RCD) in the power supply circuit for sockets with a rated current not exceeding 20 A with a rated tripping current not exceeding 30 mA.
  • Page 6 • Do not expose the electrical appliance to water or humid environments. Water entering the appliance increases the risk of electric shock. If the power cord is wet or water has entered the appliance, unplug it immediately. If the appliance is connected to the mains and if possible, switch off the power supply to the circuit breaker before attempting to disconnect the power supply.
  • Page 7 1.5 Cleaning, maintenance and repairs • Carry out routine user cleaning and maintenance of the electrical appliance only as recommended. Do not use solvents or harsh cleaning items for cleaning. Dirt and visible stains from finger contact, resp. hands can be cleaned using cleaning detergents specially designed for cleaning household appliances.
  • Page 8 2. Special safety instructions. Read carefully! • The electrical equipment is designed and manufactured in such a way as to allow safe operation and use by unqualified persons. Despite all the measures taken by the manufacturer for safe use, operation, there are certain residual risks and the possible dangers associated with them.
  • Page 9 Unpacking/Packaging • Before putting the device into operation, unpack the device and dispose of all its parts and accessories of packaging materials, labels and tags. Keep all packaging materials in a safe place or keep them out of the reach of children and vulnerable people. Risk of serious injury! Danger of suffocation! Inspection/Commissioning...
  • Page 10 • The appliance may only be installed on a floor made of reaction-to- fire class materials Bfl, Cfl, Dfl, Efl or Ffl using an insulating pad. From selected materials we present e.g. floorboards, OSB boards, beech parquets, PVC, laminate floating floor, linoleum, polyamide carpets, etc.
  • Page 11 • The device must be installed in accordance with the national and local safety regulations applicable to the connection of electrical equipment with protective earthing. To provide additional protection against the risk of electric shock, it is recommended to install a residual current device (RCD) in the electrical supply circuit of the device with a rated tripping current not exceeding 30 mA.
  • Page 12 Warning! To prevent overheating, do not cover the heater. • Do not partially cover the device. Do not place any objects on the device. Do not insert or allow foreign objects to enter the openings of the device covers. • Do not cover the air vents. •...
  • Page 13 • Do not use the appliance near bathtubs, showers, washbasins or other vessels containing water, including swimming pools. Do not remove the device if it falls into the water. Unplug the power cord from the power outlet first, then remove the device from water. In such cases, take the device to a specialist garage to check that it is safe and working properly.
  • Page 14 • If you notice any abnormalities (sounds, odors, smoke ...) while using the appliance, switch off the appliance immediately and disconnect it from the mains. Have the device checked by a qualified workshop. • Never attempt to repair, disassemble or otherwise modify the device yourself, as this may result in electric shock or fire.
  • Page 15: Description Of Parts

    Description of parts 1 Rotary knob switching on one halogen tube switching on two halogen tubes switching on three halogen tubes switching on one halogen tube with oscillation - rotation by 70° switching on two halogen tubes with oscillation - rotation by 70° switching on three halogen tubes with oscillation - rotation by 70°...
  • Page 16: Operation/Preparation

    Operation/Preparation Do not connect the appliance to the mains before preparation and all switches must be in position 0. Make sure that the package contains all the parts needed to assemble the halogen heater. If this is not the case, contact your dealer. Package contents: halogen heater (1 pc) base (1 pc)
  • Page 17: After Operation

    With oscillation This power-adjustable halogen heater is also equipped with an oscillation function (side-to-side rotation). 1 Turn the knob (1) to the position to switch on the device and the first (middle) halogen heating tube with a power of 400 W with oscillation - rotation by 70 °...
  • Page 18: Technical Specifications

    Technical specifications Power supply: 220 - 240V~ 50 - 60 Hz Power consumption: 1 200 W (400/800/1 200) Number of tubes: 3 (min. service life 3 000 hours) Dimensions (W x H x D): 33 x 51 x 24.5 cm (with stand) Suitable for spaces: approx.
  • Page 19 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Dispose of used packaging material at a municipal waste disposal site.

Table of Contents