Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Orava IO-20
Summary of Contents for Orava IO-20
- Page 1 Infrared heater IO-20 Instruction manual IO-20...
-
Page 2: Intended Use Of The Device
ORAVA electrical appliances are manufactured in accordance with the state of the art and recognized safety regulations. Nevertheless, incorrect and unprofessional use or use contrary to the intended purpose may create a risk of injury or endanger the life of the user or a third party, resp. - Page 3 1.1 General safety instructions • Before operating the unit, we recommend that you carefully read the instruction manual and operate the equipment in accordance with the instructions! • The safety instructions and warnings in this manual do not cover all the possible conditions and situations that may arise when using the device.
- Page 4 • Features of the operating environment: 1. Ambient temperature: +5 ÷ +40 ° C 2. Humidity: 5 ÷ 85% 3. Altitude: ≤ 2 000 m 4. Occurrence of water: intermittent condensation of water or occurrence of water vapor 5. Occurrence of foreign bodies: quantity and type of dust are insignificant 6.
- Page 5 • In order to provide increased safety against the risk of electric shock due to the use of electrical appliances by laypersons, it is recommended to install the power supply circuit for sockets with a rated current not exceeding 20 A RCD with a rated operating current not exceeding 30 mA.
- Page 6 • Do not expose the appliance to water or moisture. The ingress of water into the appliance increases the risk of electric shock. If the power cord is wet or the water has penetrated the water, disconnect it immediately from the mains. If the appliance is plugged into a mains socket and if possible, turn off the power circuit before attempting unplug the power.
- Page 7 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
- Page 8 2. Special safety instructions. Read carefully! • The electrical equipment is designed and manufactured in such a way as to allow safe operation and use by persons without professional qualifications. Despite all the measures taken by the manufacturer for safe use, operation and use carry certain residual risks and the possible dangers associated with them.
- Page 9 Unpacking/Packaging • Before putting the device into operation, unpack the device and dispose of all its parts and accessories with residues of packaging materials, labels and tags. Keep all packaging materials in a safe place or keep them out of the reach of children and vulnerable people. Danger of serious injuries! Danger of suffocation! Inspection / Commissioning...
- Page 10 • The appliance may only be installed on a floor made of materials of reaction to fire class Bfl, Cfl, Dfl, Efl or Ffl using an insulating pad. From selected materials we present e.g. decking, OSB boards, beech parquets, PVC, laminate floating floor, linoleum, polyamide carpets, etc.
- Page 11 • The appliance must be installed in such a way that the switches and other controls are not within human reach of the bath or shower. • Consult a qualified electrician for more detailed information on the requirements for the installation and use of electrical equipment in washrooms.
- Page 12 Operation/Supervision Warning! • The appliance may only be operated if it is in good technical condition and under the conditions laid down by the generally binding regulations on technical conditions and fire safety requirements during installation and in these operating and operating instructions. •...
- Page 13 • Parts of the appliance that become hot during operation remain hot for some time even after the appliance has been switched off and disconnected from the mains. There is a risk of burns from a hot surface! Danger of very serious injuries! •...
- Page 14 Warning! • Do not allow children to handle the device. The device can tip over and cause serious injury. Mechanical damage (cracking or breaking of parts and covers) of the device can cause serious injuries. Danger of serious injuries! There is a risk of damage to the device or other property damage! •...
- Page 15 • Never leave the device unattended and freely accessible with a loose power cord. Children, incompetent persons, or animals could pull or tip the device by the power cord. • Unplug the power cord from the electrical outlet when not in use.
- Page 16 Wall mounting before use Mounting accessories Mounting accessories 1 Drill 3 holes for 3 dowels at the top of the wall under the ceiling φ8 x 35 mm on a fl at surface. Dowels φ8 x 35 mm Hole φ8 mm...
- Page 17 2 Fasten the supplied bracket (mounting accessory) to the wall with 3 screws 3 x 32 mm and dowels inserted in the drilled holes. Dowels φ8 x 35 mm Screws 3 x 32 mm 3 Mount the unit using the positioning bracket on the unit, on the supplied wall mount bracket.
- Page 18 The device is mounted using a single mounting bracket mounted on the wall and using a positioning bracket on the device. Mounting bracket Assembly drawing Floor...
-
Page 19: Parts Description
Parts description Remote control 1 Switch 1 2 Power switch 750 W 3 Power switch 1500 W 4 Power switch 2000 W Operation, preparation Before the fi rst operation, connect the device to the mains and switch it on with the main switch on the side of the device from position 0 to position I. -
Page 20: After Operation
After operation 1 When finished, turn off the unit with the power switch 1 (1) on the remote control. The green power LED turns red and the infrared light turns off. 2 Switch off the appliance with the main switch on the side of the appliance from position I to position 0. -
Page 21: Cleaning And Maintenance
Cleaning and maintenance • Before each cleaning, unplug the appliance and let it cool down. • Use only a slightly damp cloth to clean the surface of the device itself. • Do not use any solvents or harsh cleaners. • If dirt is visible in the appliance, you can vacuum it through the ventilation grilles. -
Page 22: Technical Specifications
Technical specifications Power supply: 220 - 240 V~ 50/60 Hz Power consumption: 750 W/1 500 W/2 000 W Dimensions (wxdxh): 63 x 1 x 10,5 cm Weight: 2,25 kg Ingress protection: IP 55 We reserve the right to make changes! - Page 23 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Dispose of used packaging material at a municipal waste disposal site.