Recording Mode Setting - JVC GR-DVL40 Instructions Manual

10
EN
Power lamp
Power Switch
Display
FOCUS AUTO
EXPOSURE AUTO
W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE OFF
/ EFFECT
4 TO MODE MENU 0
END
4 REC MODE SP
WIDE MODE OFF
ZOOM 64X
DIS ON
GAIN UP AGC
TO DATE / TIME MENU
TO SYSTEM MENU
– – – – – – – – – –
END 6
4
REC MODE SP
WIDE MODE OFF
ZOOM 64X
DIS ON
GAIN UP AGC
TO DATE / TIME MENU
TO SYSTEM MENU
– – – – – – – – – –
END 6
SP
– – – – – – – – – –
6
MENU/BRIGHT
Dial
A
Recording Menu
Mode Menu
SP LP
Recording mode
indicator
GETTING STARTED

Recording Mode Setting

Set depending on your preference.
1
Set the Power Switch to "
and the camcorder is turned on.
2
Press MENU/BRIGHT. The Recording Menu appears.
3
Move the highlight bar to "TO MODE MENU" by
rotating MENU/BRIGHT. Press it and the Mode Menu
appears.
4
First move the highlight bar to "REC MODE" by
rotating MENU/BRIGHT. Press it and the parameter
"SP" or "LP" is highlighted. Select "SP" or "LP" by
rotating MENU/BRIGHT. Press it twice to exit from
the Recording Menu.
•Audio Dubbing is impossible on a tape recorded in
the LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
(cont.)
". The power lamp lights