JVC GR-DVL40 Instructions Manual page 52

52
EN
SYMPTOM
25. Images on the LCD
monitor appear dark or
whitish.
26. The rear of the LCD
monitor is hot.
27. The indicators and the
image colour on the LCD
monitor are not clear.
28. The LCD monitor or
viewfinder indications
blink.
29. Coloured bright spots
appear all over the LCD
monitor or the viewfinder.
30. During recording, sound
cannot be heard.
31. Play, Rewind and Fast-
Forward functions do not
work.
32. The tape is moving, but
there is no picture.
TROUBLESHOOTING
POSSIBLE CAUSES
25. •In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life,
images on the LCD monitor
become dark. Consult your
nearest JVC dealer.
26. •The light used to illuminate
the LCD monitor causes it to
become hot.
27. •This may occur when the
surface or the edge of the
LCD monitor is pressed.
28. •Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, "DIS"
and other functions that
cannot be used together are
selected at the same time.
29. •The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99%)
30. •This is normal.
31. •The Power Switch is not set
to " ".
32. • Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette's cover is open.
CORRECTIVE ACTION
25. •Adjust the brightness and
angle of the LCD monitor
( pg. 12).
26. •Close the LCD monitor to
turn it off or set the Power
Switch to "OFF", and let the
unit cool down.
27.
————
28. •Re-read the sections
covering Fade/Wipe effects,
Programme AE with special
effects and "DIS"
( pg. 19, 22 – 24).
29.
————
30.
————
31. •Set the Power Switch to
" " ( pg. 29).
32. •Set the TV to the mode or
channel appropriate for
video playback (
33).
•Close the cassette's cover
( pg. 9).
(cont.)
pg. 32,