Sanway Audio HT-14K Manual page 4

SANWAY AUDIO
Rear panel features introduction
- +
Mains input 200V- 240V
or 1 00V- 120V operation
Fans Speed
- +
Two-channel model shown. Two-channel versions have VCL and Bridge Mode switches for
channel 1 and 2 only. All models have different
identical.
DIP switches
for adjusting key
features
( See below)
Rear view of 2-channel model fitted with Speakon Connectors
http://www.china-sanway.com http://www.china-sanway.com
XLR connectors for
inputs and loop thru
VCL values. Functions are otherwise
6.2.2 The DIP switch features
The following features may be adjusted using the DIP
-
switches on the rear panel of the amplifier. Gain -
Globally set for all channels, from +23 dB to +44 dB in 3
dB steps.
Bridge 1+2 Switches the channel pairs into bridge mode
operation An automatic -6 dB gain compensation is
applied.
4
2 channel version
shown with Neutrik
Speakon output
connectors