Energizer EZN1200 User Manual page 14

Due to transportation and packaging, some of the accessories may be supplied disassembled. Please
follow the assembly instructions.Always use the handle to transport the machine.
STEP 1
A), Insert the extension wand(8) into the gun(9). Push and turn the extension wand(8) clockwise onto the
gun(9) until hand tight to lock it in place. When the pieces are joined properly, you cannot separate the two
components by pulling straight out on the gun(9).
Insert the detergent nozzle in the same manner, depending upon which attachment is best suited to the
surface you are cleaning. Only one attachment can be inserted into the gun at a time. All attachments must
be inserted into the gun for proper use.(Fig.1)
B), Insert the spray adjustable nozzle(7) into the extension wand(8), as quick-connect type , you just need
push it onto extension wand(8) directly and powerful until hand tight to lock it in place. When the pieces are
joined properly, you cannot separate the two components by pulling straight out on the extension wand(8).
Insert the Turbo nozzle in the same manner, depending upon which attachment is best suited to the surface
you are cleaning. Only one attachment can be inserted into the.extension wand(8) at a time. All
attachments must be inserted into the extension wand(8) for proper use. (Fig.2)
Fig.1 Fig.2
STEP 2
Install gun holder and power cord hook ,
screw the high pressure hose hook to the main body as below fig, the screws will be packed together with
the manual , pls kindly check and find it when unpacked.
STEP 3
Attach the high pressure hose(11)to the pressure cleaner water outlet. Insert and quick-connect it tight to
avoid leakage.When the pieces are joined properly, you cannot separate the two components by pulling
straight out from the water outlet. Push the "Button" according to the direction of arrow, then you can pull out
the high pressure hose.
14