Choose A Default Business Card; Pim Synchronization - MSI Star Key User Manual

Choose a Default Business Card

1. In the Select a Bluetooth Business Card dialog box that is displayed when Always send the
same business card is selected, select the card.
2. Click OK to choose a selected business card and return to the PIM Item Transfer Properties
page. Thechosen contact is now displayed and selected in the Business card requests short-
cut menu.

PIM Synchronization

The PIM Synchronization service can be used by a remote device to synchronize its Personal
Information Manager (PIM) database with the PIM database of this computer.
Four data types are supported:
Business cards
•
Calendar items
•
Email messages
•
Notes
•
Whether an individual item is accepted and where it is stored, after it is accepted, is configured
in the PIM Item Transfer service. If that service is not configured to store a particular data type in
Outlook, then that data type cannot be synchronized.
Microsoft Outlook permits duplicate entries, so all duplicates may not be exchanged in the
synchronization process.
38
Note: Move your mouse over a selected business card to display additional information
about that contact.
Note: In addition to the default menu options, the shortcut menu can hold up to ten contact
names.If the Always send the same business card option is selected again, and a different
contact is chosen, the properties page will display both contacts in the shortcut menu.
Note: Data types that will be synchronized must be saved in the PIM database (this is
configured in the PIM Item Transfer service); otherwise, that data type will not be avail-
able for selection (it will be dimmed) in the PIM Synchronization configuration settings.
Note: Only Outlook's default contacts folder is synchronized. Items in sub-folders are not
synchronized. Items that are moved from the default folder to a sub-folder will not be
displayed the next time synchronization takes place.