Network Access; Create A Network Access Connection; Close A Network Access Connection; Configure - MSI Star Key User Manual

Network Access

The Bluetooth Network Access application makes it possible for this computer:
• To connect to a Local Area Network (LAN) using the physical connection on a remote
Bluetooth device.
or
• To connect to an ad hoc network provided by a remote Bluetooth device. When joining an ad
hoc network, it can take up to one minute after the connection is established to obtain an IP
address and automatically self-configure.
The type of network connection that is available is determined by the configuration of the
remote Bluetooth device.

Create a Network Access Connection

Establish a connection using one of these techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon.
• From My Bluetooth Places.
• Using the Bluetooth Setup Wizard.

Close a Network Access Connection

• In My Bluetooth Places, right-click the service name and select Disconnect.
or
• If the connection was established from the Bluetooth icon in the Notification area, at the far
right of the taskbar; click the Bluetooth icon, select Quick Connect, Network Access and then
select the device that is providing the service (active connections have a checkmark in front
of them).

Configure

The Bluetooth Configuration Panel > Client Applications > Network Access > General tab
provides options to configure:
• The application name - to change it, highlight the existing name and enter the new name.
• Secure connection - to enable secure connection, select the option box. To disable secure
connection, clear the option box.
25