Table of Contents
Advertisement
Configure the Bluetooth Imaging Service
From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration >
Local Services, and then double-click the Bluetooth Imaging service.
Set the common configuration properties of the service, and then click OK.
Bluetooth Serial Port
The Bluetooth Serial Port service enables a remote Bluetooth device to establish a wireless
serial connection with this computer. The wireless serial connection may be used by applica-
tions as though a physical serial cable connected the devices.
To establish a Bluetooth Serial Port connection:
The connection must be initiated from the remote device by the Bluetooth Serial Port
•
application.
Determine the communications port being used by this computer for the Bluetooth Serial Port:
In the Notification area, at the far right of the taskbar, right-click the Bluetooth icon, select
•
Advanced Configuration, and then select the Local Services tab. The COM port assigned to
this service is the last item in the Bluetooth Serial Port service row. Configure the application
on this computer that will use this service to send its data to this COM.
Add or Delete a Bluetooth Serial Port
The Bluetooth Serial Port service has one pre-configured Bluetooth Serial Port, but additional
Bluetooth Serial Ports can be added as needed.
To add a port:
1. From the Bluetooth Configuration Panel, Local Services tab, click Add Serial Service.
2. In the properties dialog box, modify the properties.
Enter a unique name (fewer than 99 alphanumeric characters).
•
Select secure connection.
•
Select Startup Automatically.
•
From the COM Port shortcut menu select a communications port that is not assigned to any
•
other service.
3. Click OK.
To remove a Bluetooth Serial Port:
From the Bluetooth Configuration Panel, Local Services tab, select the port to be removed
•
and then click Delete.
Dial-up Networking Service
The Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth device to
use a modem that is physically connected to this computer. The remote device can then access
the Internet or log on to a remote network.
32
Note: The Delete button is only available when a Bluetooth Serial Port is selected.
Advertisement
Table of Contents
