Removing The Wiring Cover - Haier E Series Service Manual

Connecting the indoor/outdoor Electric Cable

Removing the wiring cover

Remove terminal cover at right bottom corner of indoor unit, then
take off wiring cover by removing its screws.
When connecting the cable after installing the indoor unit
1. Insert from outside the room cable into left side of the wall hole, in which
the pipe has already existed.
2. Pull out the cable on the front side, and connect the cable making a loop.
When connecting the cable before installing the indoor unit
Insert the cable from the back side of the unit, then pull it out on the front side.
Loosen the screws and insert the cable ends fully into terminal block, then tighten the screws.
Pull the cable slightly to make sure the cables have been properly inserted and tightened.
After the cable connection, never fail to fasten the connected cable with the wiring cover.
Note: When connecting the cable, confirm the terminal number of indoor and outdoor units carefully. If wiring
is not correct, proper operation can not be carried out and will cause defect.
1. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar
qualified person. The type of connecting wire is H05/07RN-F or 245IEC57(YZW).
2. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.
If the fuse of outdoor unit on PC board is broken, please change it with the type of T. 25A/250V.
3. The wiring method should be in line with the local wiring standard.
4. After installation, the power plug should be easily reached.
5. A breaker should be incorporated into fixed wiring. The breaker should be all-pole switch and the
distance between its two contacts should be not less than 3mm.
Power cable:
3G2.5mm
4G0.75mm
BR
BL
POWER
SUPPLY
Y/G
PAS24L03-N(T3)
Indoor unit
HSU-24LEA03(T3)
Power cable:
3G2.5mm
4G0.75mm
power plug
Indoor unit
HSU-24LEB03(T3)
Power cable:
3G2.5mm
4G0.75mm
HSU-24LEA13(T3)
HSU-24LEA13-M
BR
Indoor unit
BL
POWER
SUPPLY
Y/G
Indoor unit
Power cable:
Indoor unit
HSU-24HEA13(T3)
Outdoor unit
Power cable:
Outdoor unit
HSU-24LEA03-T
Indoor unit
HSU-32LEA13-W
HSU-36LEA03(T3)
Outdoor unit
24L/H A
Outdoor unit
3G2.5mm
6G0.75mm
BR
POWER BL
SUPPLY
Y/G
3G2.5mm
4G0.75mm
Outdoor uni t
BR
BL
POWER
SUPPLY
Y/G
46
: http://splitoff.ru/tehn-doc.html
Power cable:
3G2.5mm
6G0.75mm
AMS30H03-N(T3)
HSU-30HEA13(T3)
Indoor unit
HSU-30HEA03(T3) -
HSU-24HEA03
PAS30H03-N(T3)
BR
BL
POWER
SUPPLY
Y/G
Power cable:
3G2.5mm
6G0.75mm
BR
Indoor unit
BL
POWER
SUPPLY
HSU-24HEA03(T3)
Y/G
Power cable:
3G2.5mm
4G0.75mm
Indoor unit
HSU-24LEA03
BR
BL
POWER
SUPPLY
Y/G
Domestic air conditioner
Outdoor unit
Outdoor unit
Outdoor unit