2. Remove the
base
cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
WLAN
card.
5. Remove the
WWAN
card.
6. Remove the
display
assembly.
7. To remove the touch display panel:
a. Use a plastic scribe to loosen the edges of the display panel.
b. Flip the display screen over from the top.
c. Peel the adhesive tape [1], Mylar shield [2].
d. Release the latch [3], and disconnect the eDP cable [4].
e. Peel the adhesive tape [5], and disconnect the IR cable [6].
32
Removing and installing components