Samsung ProXpress M403 Series User Manual page 144

Wireless network setup(Optional)
1 Select (Menu) > Network > Wi-Fi > WPS on the control panel.
2 Press Connect via PBC.
3 Press OK when the confirmation window appears.
Information window appears showing 2 minutes connection processing
time.
Touch the WPS (PBC) button on the access point (or wireless router).
4
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the access point (or
wireless router).
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c AP SSID: After completing the wireless network connection process,
the AP's SSID information appears on the display.
5 Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
Connecting in PIN mode
Type in the ID and Password.
Use the same login ID, Password, Domain as when logging in from the
machine (see "Activating IPv6" on page 140). If you want to create a new
user or change the password, see "Security tab" on page 193.
1 Select (Menu) > Network > Wi-Fi > WPS on the control panel.
2 Press Connect via PIN.
3 Touch OK when the confirmation window appears.
4 The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the wireless network.
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c AP SSID: After completing the wireless network connection process,
the AP's SSID information appears on the display.
5 Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
2. Using a Network-Connected Machine
144