Reversing The Door - Respekta WKSU46-19 User Manual

Reversing the door:

Our wine cooler is delivered with the door opening from left to right. To
reverse the opening direction:
 Open the door at 90 degrees and keep it steady.
 Unscrew the two screws ① from the right lower hinge ② [Figure 1].
 Pull the door ⑤ outwards slowly [follow the arrow direction in Figure
2] to get off the lower hinge ② and continue to pull the door ⑤
downwards slowly until getting off from the top right hinge ④, and
take off the lower hinge plate ③ from the door axis hole[Figure 2].
 Screw top right hinge ④ & right lower hinge ② off from the cabinet
⑥ and keep them in the polybag for needs if you want to change
back left opening door in the future.[Figure 3]
 Install the top left hinge ⑦ & left lower hinge ⑧ to the left side of the
cabinet.(⑦ & ⑧ delivered in a separated polybag inside the packing
carton). [Figure 4]
 Turn the door ⑤ 180 degrees upside down and insert the lower hinge
plate ③ to the bottom door axis hole. Fit the top door axis hole to the
top left hinge ⑦ and put lower hinge plate ③ slowly on the left lower
hinge ⑧ and keep the door steady. Screw up the left lower hinge with
the plate. Door reversing is finished.
6