Installation Of The Handle - Respekta WKSU46-19 User Manual

Description of the appliance
Accessories & name
1. Housing
2. Shelf
3. Hygrometer
4. Display panel
5. Cover board
6. Grill
7. Adjustable
foot
Note: Shelves, door frame, handle and other accessories could be
different according to different models and configuration. All photos in
this manual are for reference. The appliance you buy might not be
exactly the same as shown here. Please refer to the actual product.

Installation of the handle:

Install handle to the door frame of the appliance.
The handle is delivered in a separated package with
screws together inside the carton.
1. Reveal two small holes on the doorframe ① from
inner side by pulling out a bit the door seal ③
2. Aim the handle ② to the holes and insert the screws
④ from inside and screw them up with screwdriver.
3. Put back door seal
③
to cover the screws.
5
12. Upper hinge
11. Door seal
10. Handle
9. Door
8. Lower hinge