MSI MS-9801 User Manual page 50

Soft-Off by PWR-BTTN
When [Enabled], turning the system off with the on/off button places the system in a
very low-power-usage state, with only enough circuitry receiving power to detect
power button activity or Resume by Ring activity.
Power-On by Alarm
When you select [Enabled], fields appear that let you set the alarm that returns the
system to Full On state.
Time (hh:mm:ss) Alarm
The field specifies the time for Power-On by Alarm. Format is <hour><minute>
<second>.
PWRON After PWR-Fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off] Always leaves the computer in the power off state.
[On] Always leaves the computer in the power on state.
[Last State] Restores the system to the status before power failure
or interrupt occurred.
BIOS Setup
3-15