Memory - MSI MS-9801 User Manual

Memory

The mainboard provides two 184-pin non-ECC DDR 333/400 DIMM slot and supports
up to 2GB system memory.
DDR
184-pin, 2.5V
Installing DDR Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
Important
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
40x2=80 pin 52x2=104 pin
Notch
Volt
Hardware Setup
2-3