Advertisement
October 2014©
Toro MP5700 ROPS Cab Operator Manual
4. Rear Work Light Rocker Switch (optional)
Low position: Off
High position: On
Note: indicator light activates when work light is on.
5. Front and Rear Washer Rocker Switch (optional)
Low position: Momentary – On Rear Washer
Middle position: Off
High position: Momentary – On Front Washer
6. Beacon Rocker Switch (optional)
Low position: Off
High position: On
Note: indicator light activates when beacon is on.
7. Fan Rocker Switch (not available)
Low position: Off
High position: On
Note: indicator light activates when 4-way flashers are on.
Cab Circuit Protection
The Tektite ROPS cab is wired to provide maximum protection against accidental circuit
overload. The cab electrical components are also fused individually, and the fuse block is
located behind the switch plate, in the centre of the ROPS. Locate access door labelled Fuses,
and remove for access to examine the fuses. A decal on the fuse block indicates which fuse is
for which electrical option.
Advertisement
