Service Tasks - Waeco ASC 6300 G LE Operating Manual

EN
21. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
22. Press ENTER
23. If necessary, use the keypad to enter the data and press
press ENTER
24. Deselect Rec/Recycling phase using No (the setting flashes) and press
25. Select Vacuum phase (the setting flashes) and press
26. If necessary, use the keypad to enter the data and press
press ENTER
27. Select Filling phase (the setting flashes) and press
28. Enter the refrigerant filling quantity (note the oil filling quantity of the compressor).
29. Then follow the instructions on the display: Select the setting (which then flashes) and press
firm.
30. Select Process start by pressing
After the filling is complete, you will be prompted to disconnect the hoses of the A/C service unit from the vehi-
cle air conditioning system.
31. Disconnect the service hoses and press
The service hoses will now be drained. the A/C service unit is then ready for further use.
32. Put the valve caps of the vehicle air conditioning system back on the connections.

14 Service tasks

14.1 Leak test
Check the A/C service semiannual for leaks in accordance with the applicable legal requirements. Use an elec-
tronic leak detector for this purpose.
14.2 Resetting the counters
After you have finished one or more service tasks, you must reset the respective counters. To do this proceed as
follows:
1. Enter the Other selections – Service menu.
2. Enter the code
3. Use the cursor keys
4. Follow the display instructions, and press and hold the
5. Switch back to the previous selection using
The following counters can be reset:
R1234 from system
g.
STOP-EXIT
R1234yf from system indicates how many grams of refrigerant have been extracted from air conditioning
systems using the menu item Short selection or Free selection since the last reset (see date).
R1234 from tank
g.
STOP-EXIT
28
to confirm.
to switch to the next program step.
to switch to the next program step.
ENTER
ENTER
.
7782
or to select the required entry and press
or to select Free selection.
ENTER
to confirm. If no data has to be entered,
ENTER
to confirm.
ENTER to confirm. If no data has to be entered,
ENTER to confirm.
.
to confirm.
ENTER
ENTER
button for 3 s.
STOP .
07/03/17
4155
07/03/17
3395
ENTER to confirm.
ENTER
to confirm.
to con-