Sharp KA-74P51BNM-PL User Manual page 55

function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press and hold the "-" button for
3 seconds until an audible signal sounds.
"ton1" will appear on the display screen.
After this, each time the "-" button is
pressed, a different signal will sound. There
are four different types of signal sounds.
If "OFF" is selected, all sounds will be
turned off except alarm and error sounds.
Select the desired sound and do not press
any other buttons. After a short time, the
selected sound will be saved.
Brightness adjustment
To adjust the display screen brightness,
press and hold the "+" button for 3 seconds.
"br1" will appear on the display screen. After
this, each time the "+" button is pressed, a
different brightness will appear.
The Thermostat symbol
The thermostat symbol ( ) utomatically
activates during oven thermostat is running.
Using the steam function
Your oven has steam cooking feature.
The water poured into the water reservoir
on the base of the oven creates hot steam
during cooking and allows you to obtain a
better cooking result from your food.
Steam cooking reduces the loss of moisture
in meat-type foods, while the inside is more
juicy and the outside is more crispy, while
the pastry makes the foods more puffy,
crispy and bulky on the outside.
WARNING:
Steam cooking can only
be performed with the functions
specified in the manual.
WARNING:
The water reservoir
capacity on the base of the oven is
300 ml maximum. Do not add more
than 300 ml of water.
To Make Steam Cooking;
Start your cooking by setting the function,
temperature and time according to the
food in the steam cooking table. For foods
not included in the table, you can set the
temperature, cooking function and time
yourself.
Place the food on the recommended shelf.
Fill the specified amount of water into the
water reservoir located in the oven panel
with the help of a container.
Tap the steam button " "on the control
screen.
The display will show "St 1".
Each time you press the "+" button, "St
2" and "St 3" will appear on the screen
respectively.
"St 1": means 100ml water, "St 2": means
200ml water, "St 3": means 300 ml water.
When you press the steam button
again after selecting the water amount,
the selected amount of water will be
automatically poured into the floor in the
oven gradually.
Select the one that suits your food from
the steam cooking functions and adjust the
temperature setting.
Your food will be cooked more delicious
thanks to the steam support.
If you wish, you can add steam after
cooking starts. To do this, follow the steps
below;
Touch the steam button " " on the control
screen for 3 seconds.
"00:00" starts to flash on the clock screen.
If you want to add steam in the minute
of cooking, adjust the minute setting
accordingly with the "+" and "-" buttons.
Tap the steam button again " " and select
the amount of water as described above.
After these operations, the determined
amount of water will be automatically
poured into the area inside the oven when
the time is up.
At the end of cooking, clean the water
remaining in the water tank and turn off the
oven.
If press the " " and "+" buttons
simultaneously for 3 seconds,steam
function is canceled.
EN - 19