Frequency/Voltage; Current Fsb Clock; Adjust Cpu Ratio; Spread Spectrum - MSI MS-7211 Instruction Manual

This entry show s the status of your CPU, fan, warning for overall system status.
Frequency/Voltage Control
Use this menu to specify your
Load Optimized Defaults
Use this menu to load factor
operations.
BIOS Settin g Password
Use this menu to set BIOS
Save & Exit Setup
Save changes to CM
Exit Without Saving
Abandon all changes a

Frequency/Voltage

Current FSB Clock

It shows the current F

Adjust CPU Ratio

This item allows you
Auto Detect DIMM/PCI Clock
This item is used to auto detect
remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic
interference (EMI).

Spread Spectrum

When the motherbo
creates EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI
generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curv
If you do not have any EMI problem, leave the setting at Disabled for optimal system stability and
performance. But if you are plagued by EMI, set to Enabled for EMI reduction. Remember to
disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a
temporary boost in clock speed which may just cause your overclocked processor to lock up.
settings for frequency/voltage control.
y default settings into the BIOS for stable system performance
setting Password.
OS and exit setup.
nd exit setup.
SB clock of . Read-only.
to adjust the CPU ratio. Setting range is from [8] to [50].
the DIMM and PCI slots. When set to [Enabled], the system will
ard's clock generator pulses, the extreme values (spikes) of the pulses
11
es.