Table of Contents
Advertisement
Chapter 3
Frequency/Voltage Control
This section describes how to set the CPU FSB frequency, spread spectrum
etc.
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
CPU Host/PCI Clock
:Move
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item is used to auto detect the DIMM/PCI slots. When set to Enabled,
the system will remove (turn off) clocks from empty DIMM/PCI slots to
minimize the electromagnetic interference (EMI). Settings: Enabled,
Disabled.
Spread Spectrum Modulated
This item is used to configure the clock generator's Spread Spectrum feature.
Settings: Disabled, Enabled. Always disable the feature when overclocking
the processor.
CPU Host/PCI Clock
This item specifies the clock frequency of CPU host bus (FSB) and PCI bus.
It provides a method for end users to overclock the processor. If the item
shows Default, the clock frequency will use the default value for the CPU
host bus and PCI bus.
Frequency/Voltage Control
Enter:Select
+/-/PU/PD:Value
F6:Fail-Safe Defaults
Enabled
Enabled
Default
Menu Level 8
F10:Save
ESC:Exit
F7:Optimized Defaults
3-30
Item Help
F1:General Help
Hide quick links:
Advertisement
Table of Contents
