Accessories - Husqvarna 350i Operator's Manual

Guide bar and saw chain combinations
The following cutting attachments are approved for
Husqvarna 350i.
Guide bar
Length, in Chain pitch, in
18 3/8" mini
Recommended cutting equipment for
USA
Following is a list of recommended cutting equipment
for Husqvarna 350i. This model equipped with either
of the listed guide bar and saw chain combination(s),
fulfills the requirements according to UL 62841-1 and UL
62841-4-1.
Chainsaw model Husqvarna 350i met the kickback
performance requirements of UL 62841-4-1 when
tested with the combinations of bars and saw chains
listed below. The saw chain Husqvarna S93G is also
classified as a low kickback saw chain since is met
the requirements for low kickback saw chain outlined
in ANSI B175.1. We recommend to use only the listed
combinations of bars and saw chains for chainsaw
model Husqvarna 350i. Other chainsaw models may not
meet the kickback requirements when equipped with the
listed bar and saw chain combinations.
Recommended cutting equipment for
Canada
Following is a list of recommended cutting equipment
for Husqvarna 350i. The listed combination(s)
5/32 in/4.0
93
mm
1844 - 003 - 28.07.2022

Accessories

Gauge, mm
1.3
60° 30°
Saw chain
Max. nose radius Type
7T Husqvarna S93G 62
of powerhead, guide bar and saw chain meet
all requirements outlined in Canadian Standards
Association Z62.1-11 (Chain saws) and Z62.3-11 (Chain
Saw Kickback).
Furthermore the saw chain Husqvarna S93G is
evaluated and listed as a Type C Low Kickback Saw
chain according to the provisions in Z62.3-11.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in/
0°
0.65 mm
Length, drive
links (no.)
596 63 596 63
89-01 84-01
37