FAR FMP70IX16M Instruction Manual page 37

inside the oven as this appliance will become
hot during use.
• EXAMPLE: Make sure the tray and grill pan
are level on both sides. Ensure that they are in
horizontal and stable.
Surfaces are likely to become hot
during use.
•
IMPORTANT
If the oven is to work properly, the kitchen
housing must be suitable. The panels of the
kitchen unit that are next to the oven must be
made of a heat resistant material. Ensure that
the glues of units that are made of veneered
wood can with stand temperatures of at least
120°C. Plastics or glues that cannot withstand
such temperatures will melt and deform the unit,
once the oven has been lodged inside the units,
electrical parts must be completely insulated.
This is a legal safety requirement. All guards
must be firmly fixed into place so that it is
impossible to remove them without using special
tools. Remove the back of the kitchen unit to
ensure an adequate current of air circulates
around the oven. The hob must have a rear gap
of at least 45 mm.
ENGLISH
GB-5