H/W Monitor - MSI 946GZ Neo Series User Manual

M S-7279 M ainboard

H/W Monitor

Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion status
and issuing a warning message if the chassis is once opened. To clear the warning
message, set the field to [Reset]. The setting of the field will automatically return to
[Enabled] later. specific step. In these items you can set the low and high tempertures,
and the values between are the range of the steps.
Smart Fan Target
W 83627DHF provides the Smart Fan system which can control the fan speed auto-
matically depending on the current temperature to keep it with in a specific range.
Smart Fan Tolerance
Before using this function, please [Enabled] Smart Fan Target this item.
You can select a fan tolerance value here for the specific range for the "Smart Fan
o
Target Temp. ( C)" item. If the current temperature of the fan reaches to the maximum
threshold (the temperatures set in the "Smart Fan Target Temp. (
ance values you set here), the fan will speed up for cooling down. On the contrary,
if the current temperature reaches to the minimum threshold (the set temperatures
minus the tolerance value), the fan will slow down to keep the temperature stable.
M in Fan Speed (%)
Before using this function, please [Enabled] Smart Fan Target this item. This item
allows you to adjust the minimum fan speed.
Smart Fan Step
Before using this function, please [Enabled] Smart Fan Target this item. This item
shows how many steps between the low and high temperatures.
3-22
o
C)" plus the toler-