Table of Contents
Advertisement
Operation
Control Panel Display
1.
Mode: Displays the current operation mode. (Manual, Temp, Weekly, or Thermostat).
2.
Work Stage: Displays the operational stage the stove is currently in. (Igniting, Heating, Fire Off,
Cleaning, Standby, Stop, etc...)
3.
Desired Temperature: In Temp or Weekly mode, this will show the currently set temperature.
4.
Heat Power Level: Displays the current set Heat level. (In Manual mode, you can directly set
this. In other modes, this will change automatically, based on other requirements set by the
stove)
5.
Current Temperature: Displays the temperature that is being read by the room temperature
sensor wire.
6.
Current Time Period: In weekly mode, this displays the current time setting.
7.
Day and Time: Displays the day of the week and current time.
8.
ECO Mode Indicator: Indicates when ECO is currently active. (ECO allows the stove to cycle
on and off automatically in the Temp and Weekly modes)
9.
Safe Mode Indicator: If the vacuum or limit switches are being bypassed, the stove will display
the word "Safe Mode" in this box. (See Settings for more info)
10.
On/Off Indicator: Indicates if the stove is on and in operation or in the process of shutting
down.
11.
Information Bar: Displays real-time messages. (such as "feeding on" when performing auger
priming for instance)
12.
Wi-Fi Indicator: (Requires wi-fi adapter, not currently supported)
13.
Child Lock Indicator: Indicates when child lock is currently active. (Child lock will lock the
panel so no other buttons can be pressed)
19
comfortbilt.net
Advertisement
Table of Contents
Troubleshooting
