MSI 845E Max2 Series User Manual page 83

1 Optical SPDIF jack
2 Coaxial SPDIF jack
3 Line Out
4 Line Out
1
Plug
Using BACK PANEL connectors only:
The audio connectors on the back panel already provide 2-channel
analog audio output function. The back panel's audio connectors can be
transformed to 4-/6-channel analog audio connectors automatically when
you select correct setting in the software utility. For information about the
setting, refer to Selecting 4- or 6-Channel Setting later in the section.
Make sure all speakers are connected to Line Out connectors. Diverse
connector configurations for 2-, 4- and 6-channel using back panel connec-
tors are described below:
2-Channel Analog Audio Output
1 Line Out (Front channels)
2 Line In
3 MIC
Description:
Line Out, Line In and MIC functions all
exist under 2-channel configuration.
Using 4- or 6-Channel Audio Function
Description:
Select the correct type of SPDIF jack to connect
SPDIF speakers. For optical connection,
remove the plug from the S-Bracket before
inserting the fiber-optic cable to it.
S-Bracket
2
3
4
1
A-7
3
2