MSI 845E Max2 Series User Manual page 70

Chapter 3
Onboard MC'97 Modem
Auto allows the mainboard to detect whether a modem is used. If a modem is
used, the onboard MC'97 (Modem Codec'97) controller will be enabled; if not,
it is disabled. Disable the controller if you want to use other controller cards to
connect to a modem. Settings: Auto, Disabled.
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC
This is used to enable or disable the onboard Floppy controller.
Option Description
Auto BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled Enables the onboard Floppy controller.
Disabled Disables the onboard Floppy controller.
Onboard Serial Port A/B
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS to automati-
cally determine the correct base I/O port address. Settings: Auto, 3F8/COM1,
2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Serial Port B Mode
This item sets the operation mode for Serial Port B. Settings: Normal,
1.6uS, 3/16 Baud and ASKIR (the last three operation modes are setting
3-22