Page 1
THE CONNECTED IRRIGATION EXPERT BL-IS AC POWERED IRRIGATION CONTROLLER Stations 2/4/6/9/12 QUICK INSTALLATION GUIDE...
Page 2
INTRODUCTION The BL-IS is a Bluetooth and AC powered irrigation controller. It’s the ® perfect solution for indoor installations like in a technical room or any indoor places. Controlled remotely from a smartphone and/or a tablet with the application MySOLEM via its web or mobile version.
Page 3
3. Launch the MySOLEM app. 4. Tap on the «Add a module» button or on the «+» button. 5. Choose the BL-IS from the list of nearby controllers. 6. To finish the pairing of your BL-IS, follow the next steps described in the app.
Page 4
1. Connect the BL-IS to the solenoids as described below. Use 24V valves only. Black Black 2. (Option) If you want to install a rain sensor, remove the yellow wire of the BL-IS and connect the sensor to the terminals S.
Page 5
Step 4 PROGRAMMING If you need more information about the BL-IS and MySOLEM app, please visit our website www.solem.fr and check our supplementary documentation. USEFUL INFORMATION What are the features required for the Bluetooth product to work? ® Smartphone or tablet running Android 4.3 or greater with Bluetooth Smart 4.0 or greater.
Page 6
How does the rain sensor work? The rain sensor when it is connected instead of the yellow wire (see wiring step for each model) affects all the 3 programs. If it rains and the rainsensor is active, programs A or B or C will not start. It is necessary to wait until the probe has dried to see the programs restart.
Page 7
INFORMATION ON THE STATUS OF THE LED Green LED: normal operation Blinking green LED: One channel is in progress (the flashing number corresponds to the station number activated). Green LED and Red Flashing: One channel is in progress and the rain sensor is activated or a station is in progress and the product is in permanent OFF or several days.
Need help?
Do you have a question about the BL-IS and is the answer not in the manual?
Questions and answers