Techno Line WT536 Manual page 25

 Press "ALARM" button to confirm your setting. The snooze time of the Alarm starts to
flash. Use the "+" and "-" buttons to set the Snooze time.
 Press "ALARM" button to confirm your setting and to end the setting procedure.
Please note:
 After 20 seconds without pressing any button the clock switches automatically from
setting mode to Normal clock mode.
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In
this case the alarm will be repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst
the alarm signal is heard.
Switching off the alarm signal
 Press any button except the "Snooze" button to stop the alarm signal. It is not necessary
to reactivate the alarm. It switches itself automatically to the alarm time which has already
been set.
Snooze function
 Touch the "Snooze" button the alarm signal sounds to get to SNOOZE mode. The alarm
signal sounds again after the Snooze time that has been set.
WT536 Manual
EN11