Table of Contents
Advertisement
pulling the drain hose farther into the
cabinet.
CAUTION
• To avoid malfunctions or leakage, it is important
that the drain hose not get kinked, pinched,
stressed or crushed behind or under the
dishwasher or inside the neighboring cabinet.
• Damage resulting from improper installation is
not covered under the warranty.
Connecting Water Supply
Line and Power
Connecting Water Supply Line
1
With the home water supply turned off,
connect the water supply tube to the tap.
2
Tighten the connection using a square drive
wrench to avoid putting stress on the water
tap.
Connecting Power
Insert the power plug into a grounded outlet.
• The power cord should not be positioned behind
the appliance but within 47.2 inches of the side
so that the plug is easily accessible.
WARNING
• Do not use an extension cord or 2-prong
adapter.
• The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
• Connect to a properly rated, protected, and sized
power circuit to avoid electrical overload.
Connecting the Drain Hose
If the end of the drain hose does not fit the drain
line, use a heat and detergent resistant adapter
(not supplied). These may be obtained from a local
plumbing supply store.
• Cut the adapter so the end matches the size of
the drain connection.
NOTE
• For drain hose installation, use the screw style
hose clamp provided with this dishwasher in the
silverware basket.
• If connecting the dishwasher's drain hose to the
garbage disposal, be sure to follow your
garbage disposal's manual for proper
installation instructions.
Drain Hose Requirements
• Follow local codes and ordinances.
INSTALLATION
15
Advertisement
Table of Contents
