Preparing Dishwasher - LG ADFD544 Series Owner's Manual

12 INSTALLATION
CAUTION
• Connect the dishwasher to a hot water supply
with a temperature range between 120 °F (49 ℃)
and 149 °F (65 ℃). This temperature range
provides the best washing results and shortest
cycle time. To prevent damage to dishes, the
temperature should not exceed 149 °F (65 ℃).
• Water supply pressure must be between 20 psi
and 80 psi (140–550 kPa). If the water supply
pressure exceeds 80 psi, a pressure reducing
valve must be installed. Otherwise premature
failure of the inlet valve may occur.
Connecting Water Supply Line and
Power
Water supply tube: Minimum 3/8" O.D. copper
tubing or metal braided dishwasher supply line
1
Connect the elbow
back of the dishwasher.
2
Connect the water supply tube to the elbow.
3
Tighten both connections using two
adjustable wrenches to avoid putting stress
on the water inlet valve.
4
Make sure the water supply is turned off.
Connect the water supply tube to the tap.
to the inlet valve on the
a
5
Insert the power plug into an outlet.
6
Turn on the water and check for leaks at the
connections.
• If there is a leak, reconnect the elbow.
• Do not cross thread or overtighten the
connections to avoid leakage.
7
Unplug the power cord.
8
Turn off the water supply and disconnect the
water supply tube at the tap.

Preparing Dishwasher

WARNING
• Do not remove safety cover. Removal can result
in fire, electric shock or death.