Table of Contents
Advertisement
TTI886DRS
Additional safety warnings for battery pack
a) Battery pack needs to be charged before use.
Always refer to the charger's instruction and charge it
properly.
b) Remove the battery pack from the product when
not in use.
c) Don't maintain the battery pack on the charger
when not in use.
d) After extended periods of storage, it may be
necessary to charge and discharge the battery pack
several times to obtain the maximum performance.
e) Longer life and better performance can be obtained
if the battery is charged when the air temperature
is between 18 °C and 24 °C. Do not charge the
battery in air temperature below 5 °C or above 40 °C.
This is important as it can prevent serious damage to
the battery.
f) Do not charge battery in a damp or wet location.
Following this rule will reduce the risk of electric shock.
g) Do not disassemble the battery and avoid
mechanical damage to the battery. Risk of short
circuit and fumes may be emitted. Ensure fresh air
and seek medical assistance in the event of discomfort.
h) When disposing of battery pack, keep the battery
pack of different electrochemical systems separate
from each other.
The following information applies to professional
users only but is good practice for all users:
MNL_18V 2X 2AH Li-ION DRILL DRIVER_V2_211220.indd 9
Safety information
12/20/21 11:43 AM
EN
9
Advertisement
Table of Contents
