Table of Contents
Advertisement
TTI886DRS
Intended use
This product is intended for drilling in wood and similar materials e.g. MDF,
plywood etc., plastic, metal and impact drilling in brick, tile and concrete, as
dangerous to health.
trade use. It must not be used for any purposes other than those described.
General operation
1. Check the product, its battery pack and charger as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear.
2.
3. Always hold the product by its handle (8). Keep the handle dry to ensure safe
support.
4.
damage the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
6.
Function selection ring
a mode rotate the function selection ring (14), to align the arrow with icon of the
drill/screw on the housing. (Fig. 7).
MNL_18V 2X 2AH Li-ION DRILL DRIVER_V2_211220.indd 25
14
Fig. 7
Product functions
12/20/21 11:43 AM
EN
EN
25
Advertisement
Table of Contents
