Toro 07389 Installation Instructions Manual page 4

2
Installing the Bed-Lift
Brackets
Parts needed for this procedure:
1 Outboard-lift bracket (short flanges)
1 Inboard-lift bracket (long flanges)
1 Hex-head bolt (5/16 x 5-1/2 inches)
1 Flange nut (5/16 inch)
Procedure
Perform the bed bracket installation at the bottom side
of the bed.
1. Remove the 2 left-most bolts (5/16 x 3/4 inch)
that secure upper-bed brace to the bed
4).
1. Bolts (5/16 x 3/4 inch)
2. Upper-bed brace
2. Remove the 2 left-most bolts (5/16 x 3/4 inch)
that secure lower-bed brace to the bed
4).
Note:
Retain the 4 bolts for installation.
Figure 4
3. Lower-bed brace
(Figure
3. Align the left outboard-lift bracket (the bracket
with the short flanges) to the outboard holes in
the upper- and lower-bed braces
1. Outboard-lift bracket (short
flanges)
2. Bolts (5/16 x 3/4 inch)
(Figure
4. Secure the outboard lift bracket to the bed using
the 2 bolts that you removed in step 1, and
hand-tighten the bolts
5. Align the inboard-lift bracket (the bracket with
the long flanges) to the inboard holes in the
upper- and lower-bed braces
6. Secure the inboard-lift bracket to the bed with
the 2 bolts that you removed in step 2, and
hand-tighten the bolts
g025008
4
(Figure
Figure 5
3. Inboard-lift bracket (long
flanges)
(Figure 5).
(Figure 5).
(Figure 5).
5).
g025009