PRODUCT USER GUIDE
2. Get started with the HDK
Before commencing the application development, you need to configure the development platform.
2.1 Configuring the EK-AI7933CLD
The top view of the EK-AI7933CLD is shown in Figure 2.
Figure 2. Jumpers and connectors on the EK-AI7933CLD
The description of pins (Figure 2) and their functionality is provided below.
1) CON8 transfer USB interface to UART interface, can debug through UART, transmit, and receive a signal
form PC.
2) CON8 is a USB 5V power for EK-AI7933CLD, or you can use external 5V power at J1.
3) CON6 is a USB OTG function com port.
4) Press SW1 to reset the system. For SW2~SW5 more detail, please see "section 4.4".
www.acsip.com.tw
Product Name
Version
Doc No
Date
Page
EK-AI7933CLD
E
912-13903
2022/11/14
5 /33