Table of Contents
Advertisement
PRODUCT USER GUIDE
20 cm separation distance and co-located issue shall be met as mentioned in "Summarize the specific
operational use conditions".
Product manufacturer shall provide below text in end-product manual
"This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body."
Antennas
Brand Name
Model Name
SINBON
IAHA202205004
SINBON
IAHA202205005
Label and Compliance Information
Product manufacturers need to provide a physical or e-label stating
"Contains FCC ID: 2ADWC-AI7933CLD" with finished product
Information on Test Modes and Additional Testing Requirements
Test tool: termite-3.3 shall be used to set the module to transmit continuously.
Additional Testing, Part 15 Subpart B Disclaimer
The module is only FCC authorized for the specific rule parts listed on the grant, and that the host
product manufacturer is responsible for compliance to any other FCC rules that apply to the host not
covered by the modular transmitter grant of certification. The final host product still requires Part 15
Subpart B compliance testing with the modular transmitter installed.
6. EVK Schematic
The following figure is the Schematic of EK-AI7933CLD
www.acsip.com.tw
Antenna Type
Antenna Gain
PCB Dipole
4.99 dBi
FPC Dipole
4.36 dBI
Product Name
Version
Doc No
Date
Page
Antenna Connector
RF Mini Plug
RF Mini Plug
EK-AI7933CLD
E
912-13903
2022/11/14
33 /33
Advertisement
Table of Contents
