Hoover HHP70CAH011 User Manual page 11

4. MAINTAINING YOUR H-PURIFIER
4.1 FILTER MAINTENANCE
Your H-Purifier will monitor the condition of your filter. A CLEAN FILTER OR REPLACE FILTER alert will blink on the left side of the display
indicating action is required to clean or change the filter.
Cleaning / Replacing the Filter: [Fig. 16]
• Remove the Air Inlet Cover from your product. [Fig. 16a]
• Unlock the Filter Release Switch. [Fig. 16b]
• Remove the Filter from your product. [Fig. 16c]
• Use a Vacuum Cleaner to clean the external layer of the Filter or Replace with a NEW filter. [Fig. 16d]
• Refit the Filter into the product. [Fig. 16e]
• Lock the Filter Release Switch. [Fig. 16f]
• Refit the Air Inlet Cover to your product. [Fig. 16g]
• Plug in your appliance to the power supply and switch on.
• Press the INFORMATION button to reset the Cleaning/ Replacing alert by holding the button for 3 secs, an audible alert will be heard to
indicate a successful reset. [Fig. 7]
Fig. 16
4.2 DIFFUSER MAINTENANCE
After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product surfaces.
Diffuser Bottle Replacement: [Fig. 17]
The volume of liquid in the bottle can be checked through the Diffuser Window, when required the bottle should be replaced.
• Remove the diffuser cover from the product. [Fig. 17a]
Remove the Diffuser Unit & Bottle from the diffuser cover. [Fig. 17b]
•
• Unscrew & remove the empty bottle. [Fig. 17c]
Remove the new bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 17d]
•
• Tightly screw the new bottle onto the diffuser unit. [Fig. 17e]
• Refit the diffuser unit into the diffuser cover. [Fig. 17f]
Refit the Diffuser cover into the H-Purifier. [Fig. 17g]
•
Fig. 17
GB
11