Hover-1 RAPTOR Operation Manual page 19

RIDING YOUR RAPTOR
Ensure your Raptor is fully assembled and correctly attached to your hoverboard with all straps, screws, and
nuts secured in place. Ensure your hoverboard is properly maintained as well. Failure to do so may result in
damage to the unit, serious bodily harm, or death.
After reviewing the pre-ride checklist, follow the steps below to begin riding your Raptor.
1. Turn on your hoverboard.
2. Sit comfortably in the Raptor seat.
2. Place your feet on the foot rests.
3. Firmly grip both handlebars and slowly push them downward simultaneously to move forward.
4. When riding, pull both handlebars upwards simultaneously to brake.
5. To ride in reverse, stop the hoverboard, then slowly pull both handlebars upwards simultaneously.
6. To turn left, push the right handlebar down and pull the left handlebar up.
7. To turn right, push the left handlebar down and pull the right handlebar up.
18