Sealite SL-75 Quick Start Manual

Quick Start Guide
SL-75
Your system will consist of: 1 x SL-75 marine lantern, switch key and IR Programmer.
Other tools required to successfully set up this product, are:
• Internet connection
• Star2M ® portal access for GSM & satellite devices
• SealitePro for Bluetooth Connectivity

Introduction

The purpose of this quick start guide is to present a brief summary of the steps involved in the installation
of the SL-75 compact marine lantern, from the physical installation of the product itself to configuration into
Star2M for GSM and satellite connected devices.

Step 1: Installing the SL-75 lantern

Remove the SL-75 marine lantern, switch key and
IR programmer from the packaging.
Carefully place on a solid work surface.

Step 3: Power the unit

Use the switch key to remove the SL-75 bung to
access the ON/OFF toggle switch.
Refer to Diagram 1.
Use the switch key to switch ON the SL-75 and
place the SL-75 bung back on the base.
For the full manual, visit the link below:
sealite.com/3-5nm-stand-alone-marine-lantern/
Thank you for purchasing this product. This guide will
provide you with a brief summary of the steps involved in
successfully installing the SL-75 compact marine lantern.

Step 2: Visit Sealite website

Visit www.sealite.com and download the
Manual from the Sealite website. This document
provides in depth information on how to fully
configure your SL-75 compact marine lantern.
Diagram 1 - Lantern Base
User Replaceable Battery
User
OFF
ON
A
B
ON / OFF
Switch
Rotary
Switch A
Rotary
Switch B
Intensity Setting