Regency Fireplace Products Horizon HZ33CE-NG10 Owners & Installation Manual page 38

installation
|
38
11. Plug in the fan power cord to the Fan Control Module into the outlet
marked "Fan". Plug the FCM-COM wire from the remote control
wiring harness into the location on the Fan Control Module marked
"COM". Turn the switch on the Fan Control Module to the ON posi-
tion. ON is to the left. The "O" is the off position
12. See the Profl ame instructions for coding the remote handheld to
the receiver and for operating instructions.
13. Reverse Steps 6 -1 to complete the installation.
38 |
®
Horizon HZ33CE-10 Gas Fireplace
919-423
TO REMOVE THE FAN
1) Shut the power off.
2) Reverse the above instructions.
Note: The bearings are lubricated for life. Do not lubricate them.
Make sure you vacuum the fan area on a regular basis.
IMPORTANT:
These fans collect a lot of dust from within your
home. Ensure you maintain these fan motors on
a regular basis by vacuuming out the fan blades
and housing using a soft brush nozzle.
3
HZ33CE
08/14/14