Advertisement
Quick Links
Advertisement
Summary of Contents for JMC BT-05 Series
- Page 1 Bluetooth Helmet Headset BT-05 Series Installation & Operation Instructions...
- Page 2 Table of Contents Product Description Section 1 Installation Instructions For Section 5B Full-Face Style Helmets Safety & General Information Section 2 Installation Instructions For Section 5C Package Contents Section 3 Shorty Style Helmets Controls and Functions Section 4 General Operation Instructions Section 6 Installation Instructions For Modular Section 5A...
- Page 3 A. Volume Down B. Volume Up E. Multifunction Button F. Headset Connection Port C. Intercom Mode Button D. Power Cable Port 4. Controls and Functions A. Volume Down – Controls step-down volume adjustment from the linked source, by press- ing once momentarily for each step of volume reduction.
- Page 4 Flip-Up & Open-Face Style Helmets J&M BT-05 Series Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or the specific helmet into which this equipment is installed.
- Page 5 5B. Installation Instructions For Most Full-Face Style Helmets J&M BT-04 Series Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or the specific helmet into which this equipment is installed.
- Page 6 Using an Exacto® Knife, cut out a hole of sufficient size to allow the microphone to be mounted through the nose section and be pressed against the inside shell. See Figure 3. Insert the microphone cartridge through the hole from the back side, Install the rubber boot and push the mike back into the hole from the front side 4.
- Page 7 Shorty Style Helmets J&M BT-05 Series Helmet Headset Installation Instructions WARNING! Helmet speakers may not be legal in all jurisdictions. Check your local laws BEFORE using this product. J & M Corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or the specific helmet into which this equipment is installed.
- Page 8 Then select the settings menu option on the cell phone, turn on the Bluetooth section and search for devices. When JMC BT-05 is displayed on your screen, select Pairing and Operation with a Bluetooth Enabled Cell/Smart it and your cell phone will pair with the HSBT-05.
- Page 9 2. From the menu on the GPS command center, go into the Bluetooth sec- tion and search for “headset”. When JMC BT-05 is displayed on your screen and you are asked for a passkey, enter: 0000. Your device should now pair with the BT-05.
- Page 10 WARRANTY AND REPAIR INFORMATION TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty, and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned, on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.