Advertisement
Product Description
Safety & General Information
Package Contents
Controls and Functions
Installation Instructions For Modular
Flip-up & Open-Face Style Helmets
1. Product Description
J&M's BT-05 elite & performance series Bluetooth headsets are designed
for installation into most modular flip-up, open-face, full- face and shorty-
style helmets, using specific designated models.
The audio performance of J&M's elite series Bluetooth headsets will rival
that of our best corded headsets, so you don't have to sacrifice good sound
when going wireless.
Our elite series features both the boom and chin-bar mount style
AeroMike® VI microphones for the very best in wind and ambient noise can-
celling at highway speeds.
Control head features the QCC module, for easy pairing to most Bluetooth
enabled audio devices, including iPhone, Android & Windows Smartphones.
The very latest multifunctional Bluetooth 5.0 software package includes
standard profiles of HSP, HFP, A2DP Stereo & AVRCP, along with the J&M
Exclusive helmet to helmet intercom profile.
Headsets (2) can be paired together for crystal clear intercom communica-
tions at distances of up to ½ mile.
Easy to feel and operate external controls for volume up/dn, helmet to hel-
met linking, multifunction button call answer/initiate/linking and on/off.
Control head is powered by a rechargeable Lithium power cell providing
10-14 hours of use from a full charge
Versatile, easy to install component design to allow removal of the control
head for in-house charging away from the helmet.
You will not find a better performing Bluetooth helmet headset anywhere;
you have our name on it.
2. Safety and General Information
IMPORTANT INFORMATION FOR SAFE AND EFFICIENT OPERATION. READ
THIS INFORMATION BEFORE USING YOUR DEVICE.
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation. See 47 CFR Sec. 15.19.
ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
Note: Nearly every electronic device is susceptible to electromagnetic inter-
ference (EMI) if inadequately shielded, designed or otherwise configured for
electromagnetic compatibility.
FACILITIES
To avoid electromagnetic interference and/or compatibility conflicts, turn
off your device in any facility where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensitive
to external RF energy.
Table of Contents
Section 1
Installation Instructions For
Full-Face Style Helmets
Section 2
Installation Instructions For
Section 3
Shorty Style Helmets
Section 4
General Operation Instructions
Section 5A
Operation Instructions
2018-21 GoldWing Instructions
MEDICAL DEVICES
HEARING AIDS
Some devices may interfere with some hearing aids. In the event of such
interference, you may want to consult with your hearing aid manufacturer to
discuss alternatives.
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the manufacturer of
the device to determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may not
cause interference and (2) This device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
FCC Notice to Users
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3. Package Contents
• BT-05 Control Head Unit
• Control Head Mounting Base
• Two Helmet Speakers
• Boom or Chin-bar Microphone
• Clip-on Mounting Assembly
• USB Charge Cable
• Velcro Pads
• Popsicle Stick
• Owner's Manual
Section 5B
Section 5C
Section 6
Section 7
Section 8
Advertisement
